RE-LI-ON CORP -- RE-LI-ON, CUTTING AND TAPPING FLUID -- 9150-00N056146
=====================  Product Identification  =====================

Product ID:RE-LI-ON, CUTTING AND TAPPING FLUID
MSDS Date:11/01/1990
FSC:9150
NIIN:00N056146
MSDS Number: BWDPY
=== Responsible Party ===
Company Name:RE-LI-ON CORP
Address:4334 W CENTRAL AVE
City:TOLEDO
State:OH
ZIP:43515
Country:US
Info Phone Num:419-537-9656
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:0TVL1
=== Contractor Identification ===
Company Name:RE-LI-ON CORP
Address:4334 W CENTRAL AVE
Box:City:TOLEDO
State:OH
ZIP:43515
Country:US
Phone:419-537-9656
CAGE:0TVL1

=============  Composition/Information on Ingredients  =============

Ingred Name:SEVERELY HYDROTREATED NAPHTHENIC DISTILLATE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PARAFFINIC DISTILLATE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PARAFFIN WAXES AND HYDROCARBON WAXES, CHLORINATED;
    (CHLORINATED PARAFFIN)
CAS:63449-39-8
RTECS #:RV0450000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CHLORINATED FATTY ACID
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CORROSION AND STAIN INHIBITOR
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: CONTACT MAY CAUSE MODERATE
    IRRITATION. SKIN: PROLONGED OR REPEATED EXPOSURE MAY CAUSE
    DEFATTING OF SKIN RESULTING IN MODERATE IRRITATION. INHALATION:
    EXCESSIVE EXPOSURES AT ELEVATED TEMPERATURES  MAY CAUSE IRRITATION
    TO EYES, NOSE, MUCOUS MEMBRANES AND RESPIRATORY SYSTEM. EXCESSIVE
    EXPOSURES MAY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: ALSO CAUSE DIZZINESS AND OTHER
    CENTRAL NERVOUS SYSTEM EFFECTS. INGESTION: PRODUCT HAS LOW ORDER OF
    ACUTE TOXICITY. PULMONARY ASPIRATION HAZARD IF SWALLOWED AND
    VOMITING OCCURS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. OBTAIN MED
    ASSIST IF IRRIT PERSISTS. SKIN: WASH WITH SOAP AND WATER UNTIL NO
    ODOR REMAINS. INHALATION: MOVE PERSON TO FRESH AIR. IF NOT
    BREATHING, GIVE A RTIFICIAL RESPIRATION AND OBTAIN MEDICAL
    ASSISTANCE. INGESTION: DO NOT INDUCE VOMITING. DO NOT GIVE LIQUIDS.
    OBTAIN MED ASSISTANCE. SML AMTS ENTERING MOUTH SHOULD BE RINSED OUT
    UNTIL NO TASTE REMAINS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>300F,>149C
Extinguishing Media:USE FOAM, WATER SPRAY (FOG), DRY CHEM CARBON
    DIOXIDE, VAPORIZING LIQ FOR THIS TYPE OF PROD DEPENDING ON SIZE OR
    (SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . PLAN FIRE PROT & RESPONSE STRATEGY THRU CONSULTATION W/LOC FIRE
    PROTECTION AUTHORITIES/APPROP SPECIALIST.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PVNT IGNIT, STOP LEAK, VENT AREA. CONTAIN
    SPILL BY DIKING/IMPOUNDING. ADD SAND, EARTH, OR OTHER SUITABLE
    ABSORBENT TO SPILL AREA. KEEP PROD OUT OF SEWERS & WATERWAYS. WEAR
    NIOSH/MSHA APPRVD RESP PROTE CTION FOR LARGE SPILL, LEAK OR
    RELEASE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN EVENT OF VAPOR CONCENTRATIONS EXCEEDING TIME
    WEIGHTED EXPOSURE LIMIT USE NIOSH/MSHA APPROVED CARTRIDGE
    RESPIRATOR OR GAS MASK.
Ventilation:USE WITH ADEQUATE VENTILATION. VENTILATE AS NEEDED TO
    COMPLY WITH EXPOSURE LIMIT.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VAPOR PRESSURE: LESS THAN ETHER (60F). EXTINGUISHING MEDIA: POTENTIAL
    SIZE OF FIRE AND CIRCUMSTANCES RELATED TO SITUATION.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SUPP DATA
Spec Gravity:0.924 
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AND REDUCING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
    HYDROGEN CHLORIDE AND OXIDES OF SULFUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.