PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO) -- LAVAX MACHINERY ENAMEL, 23-76 -- 8010-00N028102
=====================  Product Identification  =====================

Product ID:LAVAX MACHINERY ENAMEL, 23-76
MSDS Date:01/09/1991
FSC:8010
NIIN:00N028102
MSDS Number: BMSFM
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)
Address:ONE PPG PLACE
Box:9
City:PITTSBURGH
State:PA
ZIP:15272-0001
Country:US
Info Phone Num:412-434-3131
Emergency Phone Num:412-434-3131
CAGE:47695
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:RESP PROT:THE TYPE OF AIRBORNE CONTAMINANTS WHICH THE
    RESPIRATOR IS EFFECTIVE AND HOW IT IS TO BE PROPERLY FITTED.
RTECS #:9999999ZZ

Ingred Name:VENT:EXPOSURE LIMITS, THE LEL BELOW STATED LIMIT & TO
    REMOVE DECOMP PRODS DURING WELDING/FLAME CUTTING ON SURFS (ING 20)
RTECS #:9999999ZZ

Ingred Name:ING 19:COATED WITH THIS PRODUCT.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC:PERSISTENT SKIN/EYE IRRITATION OR BREATHING
    DIFFICULTIES.
RTECS #:9999999ZZ

Ingred Name:SILICA, CRYSTALLINE - QUARTZ;(CRYSTALLINE SILICA (QUARTZ))
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 15-20%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:ALUMINUM SILICATE
CAS:1335-30-4
Fraction by Wt: 10-15%

Ingred Name:CARBONIC ACID, CALCIUM SALT (1:1);(CALCIUM CARBONATE).
    PEL:15 MG/M3 TDUST; 5 MG/M3 RDUST.
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 30-35%
OSHA PEL:SEE INGREDIENT NAME
ACGIH TLV:10 MG/M3

Ingred Name:PIGMENTS
Fraction by Wt: 5-10%

Ingred Name:SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC;(MEDIUM
    ALIPHATIC SOLVENT NAPHTHA)
CAS:64742-88-7
Fraction by Wt: 2-5%

Ingred Name:HYDROTREATED HEAVY NAPHTHA
CAS:64742-48-9
Fraction by Wt: 35-40%

Ingred Name:SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC;(MEDIUM
    ALIPHATIC SOLVENT NAPHTHA)
CAS:64742-88-7
Fraction by Wt: 35-40%

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 20-25%

Ingred Name:SUPP DATA:PROD CNTNS CRYSTALLINE SILICA-QUARTZ WHICH IARC
    ASSOC W/AN INCR RISK OF CANCER IN LAB ANIMALS. LONG (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10:TERM EXPOS TO CRYSTALLINE SILICA MAY ALSO LEAD TO
    DISABLING INJURY KNOWN AS SILICOSIS. EFTS ARE ASSOC (ING 12)
RTECS #:9999999ZZ

Ingred Name:ING 11:W/BRTHG EXCESSIVE AMTS OF SILICA DUST.APPLIC OF PROD
    NOT EXPECTED TO GENERATE EXCESS AMTS OF RESP SILICA,(ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12:SO POTNTL HAZ FOR HUMANS IS LIMITED. SIGNS/SYMPS:EYE
    WATERING, HDCH, NAUS, DIZZ, & LOSS OF COORD ARE (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13:INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. REDNESS,
    ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY (ING 15)
RTECS #:9999999ZZ

Ingred Name:ING 14:INDICATE EXCESS EYE CONTACT. DRYNESS, ITCHING,
    CRACKING, BURNING, REDNESS, & SWELLING ARE CNDTNS ASSOC W/(ING 16)
RTECS #:9999999ZZ

Ingred Name:ING 15:EXCESSIVE SKIN CONTACT.
RTECS #:9999999ZZ

Ingred Name:TITANIUM OXIDE;(TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 15-20%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:CAUSES
    SEVERE IRRIT. SKIN:MAY CAUSE MOD IRRIT. INHAL:VAP/MIST MAY BE
    HARMFUL IF INHALED. SANDING/GRINDING DUSTS MAY BE HARMFUL IF
    INHALED. VAP IRRITATES EYES, NOSE, & THROAT.  RPTD EXPOS TO HIGH
    VAP CONC MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN/NERV SYS DMG.
    INTENTIONAL MISUSE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE: NTP GROUP 2, IARC
    GROUP 2A.
Effects of Overexposure:HLTH HAZ:BY DELIBERATELY CONC & INHALING
    CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:AVOID LONG TERM/RPTD CONT.
    CNTNS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF TITANIUM
    DIOXIDE DEVELOPED LUNG TUMO RS. STUDIES W/HUMANS INVOLVED IN MFR
    OFPIGMENT INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR
    INHAL (SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
    FOR AT LEAST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED
    BY WASHING W/SOAP & WATER. INHAL:MOVE TO FRESH AIR. APPLY ARTF RESP
    & OT HER SUPPORTIVE MEASURES AS REQ. IF ANY OF FOLLOWING OCCUR
    DURING/FOLLOWING USE OF PROD CALL POIS CTL CTR, EMERG ROOM, OR MD
    IMMED. HAVE MSDS INFO AVAIL. INGEST:EXCESS EXPOS TO CORROSIVE
    MATL.(ING 17)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:0.9%
Extinguishing Media:NFPA CLASS B EXTINGS (CO, DRY CHEM/UNIVERSAL AQ
    FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS II COMBUST LIQ
    FIRES.
Fire Fighting Procedures:WEAR NOISH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . WATER SPRAY MAY BE INEFTIVE BUT MAY BE USED TO COOL CLSD CNTNRS
    TO PVNT PRESS BUILD-UP/POSS AUTO- (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
    WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY ON(SUPP DATA)

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED WITH PROPER RESPIRATORY PROTECTION SHOULD BE PERMITTED IN
    AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATL WITH
    SAWDUST, VERMICULITE, OR  OTHER ABSORBENT MATL & PLACE INTO CNTNRS
    FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
    READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTING MIXTURE
    MAY HAVE HAZS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
    POURING. AVOID FRE E FALL IF LIQS IN EXCESS OF FEW INCHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
    CNTRLS. VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
    PAINT SPRAY OR AIR SUPPLIED RESPS MAY ALSO REDUCE EXPOS. READ RESP
    MFRS INSTRUCTIONS/LITE RATURE CAREFULLY TO DETERMINE (ING 18)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOLUME & PATTERN
    TO KEEP CONC OF INGREDS  BELOW LOWEST SUGGESTED (ING 19)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERVEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:IGNIT OR EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER
    IS USED, FOG NOZZLES ARE PREF. EXPLO HAZ:HOT SURFS. TOX GASES MAY
    FORM WHEN PROD CONTACTED BY FLAME OR HOT SURFS. EFTS OF OVEREXP: OF
    TITANIUM DIOXIDE DUSTS IS VERY LIMITED. SINCE OVEREXPS NOT
    EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN. (ING 10)

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.4
Evaporation Rate & Reference:17 (BUTYL ACETATE=100)
Solubility in Water:0.1%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
    INGREDIENTS LISTED.
Percent Volatiles by Volume:<54

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
    HEATED.WELDING/BRAZING/FLAME CUTTING ON SURFS COATED W/PROD MAY
    PRODUCE FUMES INCL:CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
    THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.