Machining Technology Diploma Day Program (printable copy)
Effective Fall Semester 2008 - 2009¹

(D50300) Day Program 3 Semesters			HOURS
		CLASS	LAB	CREDIT
1 – Fall Semester, 2008
DFT 119	Basic CAD	1	2	2
MAC 111	Machining Technology I	2	12	6
MAC 121	Introduction to CNC	2	0	2
MAC 131	Blueprint Reading  MACH I	1	2	2
MAT 101	Applied Mathematics I*	2	2	3
PHY 110	Conceptual Physics	3	0	3
PHY 110A	Conceptual Physics Lab	0	2	1
2 – Spring Semester, 2009
ENG 111	Expository Writing*	3	0	3
MAC 112	Machining Technology II	2	12	6
MAC 122	CNC Turning	1	3	2
MAC 124	CNC Milling	1	3	2
MAC 151	Machining Calculations	1	2	2
MAC 226	CNC EDM Machining	1	3	2
3 – Summer Term, 2009
BPR 132	Blueprint Reading MACH II	1	2	2
MAC 113	Machining Technology III	2	12	6
MAC 222	Advanced CNC Turning	1	3	2
MAC 224	Advanced CNC Milling	1	3	2
Total Semester Hours Required for a Diploma				48

CNC Certificate (printable copy)
Effective Fall Semester 2008 - 2009¹

(C50300C) Day and Evening Program			HOURS
		CLASS	LAB	CREDIT
MAC 131	Blueprint Reading  MACH I	1	2	2
MAC 121	Introduction to CNC	2	0	2
MAC 122	CNC Turning	1	3	2
MAC 124	CNC Milling	1	3	2
MAC 151	Machining Calculations	1	2	2
MAC 222	Advanced CNC Turning	1	3	2
MAC 224	Advanced CNC Milling	1	3	2
MAT 101	Applied Mathematics*	2	2	3
Total Semester Hours Required for a Certificate				17

Basic Machining Certificate (printable copy)
Effective Fall Semester 2008 - 2009¹

(C50300M) Day and Evening Program			HOURS
		CLASS	LAB	CREDIT
DFT 119	Basic CAD	1	2	2
MAC 111	Machining Technology I	2	12	6
MAC 121	Introduction to CNC	2	0	2
MAC 131	Blueprint Reading  MACH I	1	2	2
Total Semester Hours Required for a Certificate				12

*ENG 070, ENG 080, ENG 090, ENG 090A, MAT 050, MAT 060, RED 070, RED 080, or RED 090 may be required based on placement test results.

¹The following plan of study is the standard curriculum for the above program. Any deviation from the prescribed curriculum must have approval in advance. All prerequisite course requirements must also be met. To graduate the student must successfully complete all the required courses, the required credit hours for electives, and have at least a 2.0 overall grade point average. This plan of study is subject to change when the college thinks such action is in the best interest of the student or the program. It is the responsibility of the student to meet requirements for graduation. If accepted students do not enroll for three successive semesters, they must contact the Admissions office to determine if readmission is necessary.

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

Please note that you need Adobe® Acrobat® Reader to view and print the old plans of study. Go to the Adobe Web site to download your free copy if you do not already have it installed.