skip to main content


Industrial Systems Technology Plan of Study

2014 – 2015

Industrial Systems Technology Degree

HVAC Certificate

Maintenance Certificate


Industrial Systems Technology Degree (A25100) – Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
FALL SEMESTER, 2014
ACA 122 College Transfer Success 1 0 1
ELC 112 DC/AC Electricity 3 6 5
ENG 111 Writing and Inquiry* 3 0 3
HYD 110 Hydraulics/Pneumatics I 2 3 3
MAT 121 Algebra/Trigonometry I* 2 2 3
SPRING SEMESTER, 2015
ELC 117 Motors and Controls 2 6 4
ENG 112 Writing/Research in the Disciplines 3 0 3
ISC 112 Industrial Safety 2 0 2
MNT 110 Intro to Maintenance Procedures 1 3 2
Humanities Elective     3
SUMMER TERM, 2015
CIS 110 Introduction to Computers 2 2 3
PLU 111 Intro to Basic Plumbing 1 3 2
ELC 215 Electrical Maintenance 1 3 2
Major elective – one choice is:
ELC 128 Introduction to PLC 2 3 3
FALL SEMESTER, 2015
AHR 110 Intro to Refrigeration 2 6 5
BPR 111 Blueprint Reading 1 2 2
WLD 112 Basic Welding Processes 1 3 2
MEC 111 Machine Processes I 1 4 3
Social Sciences Elective     3
SPRING SEMESTER, 2016
AHR 112 Heating Technology 2 4 4
MNT 230 Pumps and Piping Systems 1 3 2
MNT 240 Industrial Equip Troubleshooting 1 3 2
WLD 121 GMAW (MIG) FCAW/Plate 2 6 4
Major elective – one choice is:
WBL 110 World of Work AND WBL 111 Work-Based Learning I     2
Total Semester Hours Required for AAS Degree 67 – 67

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

* ENG 070, ENG 080, ENG 090, ENG 090A and RED 070, RED 080, RED 090 or DRE 096, 097, 098; MAT 050, MAT 060, MAT 070 or DMA 010, DMA 020, DMA 030, DMA 040, DMA 050 may be required based on placement test results

Humanities Electives: ART 111, ART 114, ART 115, ART 117, DRA 111, DRA 122, ENG 231, ENG 232, ENG 233, ENG 241, ENG 242, ENG 243, ENG 251, ENG 252, ENG 261, ENG 262, HUM 110, HUM 115, HUM 120, HUM 121, HUM 122, HUM 150, HUM 160, MUS 110, MUS 113, PHI 215, PHI 240, REL 110, REL 211.

Major Elective: Choose either WBL 110 World of Work (1) and WBL 111 Work Based Learning I (1)
or ELC 128 Introduction to PLC (3)

Social Science Electives: ANT 210, ANT 220, ECO 251, ECO 252, GEO 111, GEO 112, HIS 111, HIS 112, HIS 121, HIS 122, HIS 131, HIS 132, POL 120, POL 220, PSY 150, PSY 241, PSY 281, SOC 210, SOC 213, SOC 215, SOC 220, SOC 225.


HVAC Certificate (C50240C)
Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
MNT 110 Intro to Maintenance Procedures 1 3 2
ISC 112 Industrial Safety 2 0 2
AHR 110 Introduction to Refrigeration 2 6 5
AHR 112 Heating Technology 2 4 4
Total Semester Hours Required for Certificate 13

Maintenance Certificate (C50240M)
Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
MNT 110 Intro to Maintenance Procedures 1 3 2
MNT 230 Pumps and Piping Systems 1 3 2
ISC 112 Industrial Safety 2 0 2
BPR 111 Blueprint Reading 1 2 2
MEC 111 Machine Processes I 1 4 3
PLU 111 Intro to Basic Plumbing 1 3 2
Total Semester Hours Required for Certificate 13

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

The above plan of study is the standard curriculum for the above program. Any deviation from the prescribed curriculum must have approval in advance. All prerequisite course requirements must also be met. To graduate the student must successfully complete all the required courses, the required credit hours for electives, and have at least a 2.0 overall grade point average. This plan of study is subject to change when the college thinks such action is in the best interest of the student or the program. It is the responsibility of the student to meet requirements for graduation. If accepted students do not enroll for three successive semesters, they must contact the Admissions office to determine if readmission is necessary.